A DIY Vintage Coat Rack, in 4 Steps

Posted by admin on Nov 23, 2020

Those of us who grew up in New England are used to making do with what’s available. Long before coat closets became the norm, people hung their clothes on rows of hooks or pegs (think of the Shakers).

Create your own row of storage hooks using the following blueprint. (A hidden benefit: You can customize it to fit any space or need—in my case, beach towels.)

Above: My Auntie Jessie made this custom coat hook rack for her guest room (see more of this home at Designskool).

Above: Vintage hooks like these are easy to find at your local flea market or antique store. You can also find them on eBay or Etsy.

Materials

Antique hooks
A three-quarter-inch-thick length of wood (new or salvaged)
Short screws to affix the hooks to the board
Longer screws to secure the board to the wall

Directions

Step 1: Select a board that fits the length of wall that you wish to cover. If the wood is unfinished, consider staining it or painting it.

Step 2: Mark the hook spacing using a pencil (space the hooks at least eight to 12 inches apart to give garments or towels room to breath).

Step 3: Once you’ve determined the spacing of the hooks, screw them into the board, using short screws that won’t go through the board.

Step 4: Using longer screws, fasten the board to the wall in at least two places (you may need more for longer boards). Paint the screws the same color as the board or leave them exposed for a more rustic look.

Above: The finished product, made with a piece of salvaged board, holds beach items on my porch.

N.B.: This post is an update; the original story ran on May 10, 2012.

For more DIY ideas, consider:

Share this post

← Older Post Newer Post →